| 報名序號 | 專題名稱中文 | 專題名稱英文 |
| 1 | TBOT 智慧隨行助手 | TBot-The Intelligent Companion Assistant |
| 2 | 鋰離子電池正極材料電性之量測 | Measurement of Electrical Properties of Cathode Materials in Li-Ion Batteries |
| 3 | 自主垃圾管理和回收壓縮智慧機器人 | An Intelligent Robot for garbage collection and compression |
| 4 | 球磨時間與石墨烯、鈀元素以及活化方式對ZE5x鎂合金儲氫性能之影響 | Effect of ball milling time, adding graphene, palladium and reactivated process, on the hydrogen storage performance of ZE5x alloy |
| 5 | 遙控車設計與應用 | Remote controlled cars design and application |
| 6 | 運動中物體的量測 | Underwater device measurements |
| 7 | 雙自由度擺錘驅動球形機器人平台 | Two-Degree-of-Freedom Pendulum-Driven Spherical Robot Platform |
| 8 | 1064 nm 光纖雷射 Cu/Cu 銲接技術開發與行為檢證 | Development and Behavior Verification of 1064 nm Fiber Laser Cu/Cu Welding Technology |
| 9 | 紅光光纖雷射誘發麻田散鐵系局域沃斯田鐵化之銲接行為 | Welding Behavior Induced by Red Light Fiber Laser for Localized Martensite-to-Austenite Transformation |
| 10 | 實時多串流AI影像辨識用於工地職業安全檢測 | Real-time multi-stream AI image recognition for construction site occupational safety inspection |
| 11 | 開發用於半導體製程的直寫光刻系統 | Developing a Direct Write Lithography System for Semiconductor Fabrication |
| 12 | 教室借用系統 | Online classroom borrowing system |
| 13 | 滾翼機機構設計與模擬 | Development and Simulation of cycloidal-rotor aircraft |
| 14 | 3D掃描模組應用於3D列印FDM機型 | 3D Scanning Module Applied to FDM 3D Printers |
| 15 | 輕量化機械手臂設計與控制 | Design and Control of High-Performance Lightweight Robotic Arms |
| 16 | CNC線切割放電加工之「割一修一」技術開發 | Development of “One-cut and One-skimming” Technology for CNC Wire-Electric Discharge Machining |
| 17 | 基於飛秒雷射複合薄膜技術之自供電元件製作與效能提升研究 | Fabrication and Performance Enhancement of Self-Powered Devices Using Femtosecond Laser Processing of Thin-Film Composites |
| 18 | 仿生蝸牛機器人設計與控制 | Design and Control of a Bionic Snail Robot |
| 19 | 撿放燈球機器人 | pick and place lamp ball robot |
| 20 | 基於增強式學習之未知環境探索機器人 | Reinforcement Learning-based Robot for Exploring Unknown Environments |
| 21 | 整合自供電電池與壓阻感測器之一體化穿戴式元件開發 | Development of Integrated Self-Powered Battery and Wearable Piezoresistive Sensor Device |
| 22 | 生成式學習應用於關鍵射出壓力資訊萃取與曲線還原 | Generative Artificial Intelligence Applied to Key Injection Pressure Information Extraction and Curve Reconstruction |
| 23 | 以雷射滲氮技術改質鈦合金表面應用於人工膝關節植入 | Surface Modification of Titanium Alloy for Artificial Knee Joint Implants Using Laser Nitriding Technique |
| 24 | 烏賊機器人機構比較 | Cuttlefish Robot Mechanism Comparison |
| 25 | Mecanum-Wheeled輪椅智能斜坡煞車控制與加速規回授系統設計 | Intelligent Slope Braking Control and Accelerometer Feedback System Design: The Case of Mecanum-Wheeled Chair |
| 26 | 導螺桿位置感測與控制系統研製 | Design and Implementation of Position Sensing and controlling System for Lead-Screw Drives |
| 27 | OP3魔術表演 | The magic show of the OP3 |
聯繫窗口
國立臺灣科技大學機械工程系
莊喻淇小姐
Tel: (02)27376452
E-mail: ycchuang@mail.ntust.edu.tw
楊振菲先生
E-mail: mechaheroes.contest@gmail.com
國立臺灣師大學機電工程學系
張家睿先生
Tel: (02)77493503
E-mail: j88eric@ntnu.edu.tw
國立臺灣師範大學機電工程學系
國立臺灣科技大學機械工程系
FB競賽專頁